btn login

icon phone  Phone

0800 464 393


Hustler SL350 Chain Feeder

Hustler SL350 Chain Feeder
larger imageMove mouse over the image to magnify
End-of-line Clearance Deals on this great model.

$7,250 +GST - SAVE OVER $2,000!!!

Call 0800 464 393 for details.
(conditions may apply)

Hustler SL350 Chain Feeder
SL350 balefeeder is a 3 point linkage mounted single balefeeder suitable for all types of round bales, even 5’ long.

  • Doesn’t matter which way the bale goes on.
Optional side bars for feeding out square bales

  • 12 000 lb roller chain. Strongest on the market!
  • Weight transfer is along the bars and through the rollers onto the track in comparison to link chain – straining at every link
  • 40mmø rollers which travel 130mm each revolution are very low wearing (A 30mm øroller travels only 95mm meaning it is working harder)
  • Impossible for chain to jump off the sprocket and is covered for safety
  • Tucked away each end for minimal wrapping
  • Zinc coated

  • Zinc plated
  • 40mm x 40mm RHS is 4-5 times stronger torsionally than angle of same size
  • Bolted onto the chain is stronger and easily replaceable
  • For different bale types blank bars or bars with more aggressive teeth are available

  • Shark teeth release the feed off the taper at the correct point
  • 6mm for extra strength
  • Tips can be angled for more aggression

  • Fully enclosed - no wastage of expensive feed
  • Polyethylene is impervious to UV, non corrosive, slipery to reduce drag and drive power, easily repairable and very shock resistant
  • Long bed can take 5’ long bales

  • Heavy duty hardened 1” drive pins.
  • Direct drive
  • 400cc motor
  • 480kg is the lightest in it’s class. This is achieved by using high grade steel (50%stronger than mild steel) and clever engineering.
  • High hook position means the weight is distributed across 3 points and the strain comes off the ends of the tines
  • Super low cradle is easy to load with 3PTL and means you don’t rely on a front end loader (FEL)
  • Right tyne is longer than the left so easy to reconnect to the cradle > Slotted top link hole so linkage can float when reconnecting
  • Cat 1 & cat 2 mounting points
  • Rope sleeve keeps rope clear of wheel

  • The high rear bar means the bale cannot screw off the back on hills
  • Optional side rails are available

  • Designed for minimal damage to wet ground

  • Outboard bearing blocks are in a good position to keep clean and greased
  • No need for chain tensioning

You might also be interested in ...

Furth T70 ATV Causmag Spreader
Call 0800-464-393
5m Snig Chain
NZ $109.00
excl GST
Web Lifting Sling
NZ $28.00
excl GST
Monster Seal Tire Sealant
NZ $31.00
excl GST